MS Sensor 3.0

Supported Instruments and Sensors

The MS Sensor software uses an interface architecture that allows data to be collected from several kinds of instruments. A driver has been written for each instrument described below.

Supported Instruments

The following table lists the instrument drivers that are currently provided with the MS Sensor software.

Instrument	Description
Diablo MS Simulator	A simple simulator that generates random abundance values over a specified "mass range". This "instrument" driver is used for testing, demonstration, and training purposes.
Agilent 5973 or 5975 Network MSD	The Agilent Technologies 5973N and 5975Mass Selective Detectors (MSD) using the Ethernet/Network interface.
MKS 651C Pressure Controller	Reads pressure data from an MKS Instruments 651C Pressure Controller using a serial interface.
MKS PR4000 Pressure Controller	Reads pressure data from an MKS Instruments PR 4000 Pressure Controller using a serial interface.
MKS PDR2000 Pressure Controller	Reads pressure data from an MKS Instruments PDR 2000 Pressure Controller using a serial interface.
Diablo MPValve Multiposition Valve Control Software	An instrument driver that integrates the MS Sensor software with Diablo's MPValve 3.0, multiposition valve controller software for VICI multiposition, stream-selection valves. Important: The MPValve software must be licensed separately from the MS Sensor software.

It is possible for other instruments to be added to the MS Sensor process analysis software via a custom driver developed by Diablo Analytical, Inc. Please contact Diablo for more information.

>>Back to MS Sensor Overview<<