========================================================================== Diablo Analytical EZReporter Software Advanced Reporting and Analysis for Chromatography Data Systems (c) Copyright 2010-2011 Diablo Analytical, Inc. All Rights Reserved Diablo Analytical, Inc. 5141 Lone Tree Way Antioch, CA 94531 Phone: (925) 755-1005 Fax: (925) 755-1007 E-mail: support@diabloanalytical.com WWW: http://www.diabloanalytical.com Support: http://www.diabloanalytical.com/support.htm ========================================================================== RELEASE NOTES Version: 2.0.1.1 Release Date: 12/16/2011 Software Support: ----------------- Diablo Analytical has implemented a web-based help desk for application and software support. For more information, please visit the support page of our web site: http://www.diabloanalytical.com/support.htm Important Notes: ---------------- IMPORTANT: In order for EZReporter NGA to calculate and report results based on any newly added physical properties, you will need to update your existing configuration(s) to include the new physical properties. See the "NGA Physical Property Update Procedure" in the EZReporter "Help" menu for more information. Version History: ---------------- [-] = Bug fix or change in behavior [+] = Enhancement [STD] = Standard/base Module [NGA] = Natural Gas Analysis Module [RDB] = Results Database Module Version 2.0.1.1 --------------- >> Merged from main development branch, version 2.1.0.4. [-] [NGA] Fixed error in the calculation of Gross Heating Value (btu/cuft) for the extended C6+ fraction. [-] [RDB] Added code to allow text strings containing apostrophe characters to be saved in the results database and queried. [-] [STD] The component table in the manual entry window now displays the number of decimal places specified in the Calculation Settings (it had been fixed at 3 decimal places). << Merged from main development branch, version 2.1.0.4. Version 2.0.1.0 --------------- [+] [STD] Updated reference manual and quick start manuals. [+] [STD] Added a Quick Start Guide for the Cerity data system. It is installed if Cerity is detected on the target computer. [-] [NGA] Addressed rare situation where a divide by zero error would occur when calculating the water content correlation. [+] [NGA] Added GPA 2177-03 Calculation Check configuration and data file. And a default GPA 2177-03 configuration file. [-] [STD] Fixed problem with horizntal scrollbars not showing on the Sample Specific Processing configuration dialog. [+] [RDB] Added the new results to the NGAResults table and Updated the results database schema to version 2.0.1 Older versions will be upgraded automatically when EZReporter is started. [+] [NGA] Added the following new results: Vapor Pressure in psig, and Total Liquid Density calculated directly from the relative liquid density rather than from the sum of the component liquid densities. This result is labeled with a "2" suffix in the configuration/report (Total Liquid Density 2). [+] [NGA] Added the ability to specify raw component units in volume% to support the GPA 2177-03 standard. The corresponding weight% and mole% are then calculated from the volume%. Note: In this mode, the "wet" and "sat" results are *not* calculated. [+] [NGA] The raw component units (mole%, weight%, volume%) can now be set independent from the NGL/Extended reporting option. The selection of raw component units was moved from the NGL configuration tab to the main NGA tab. Version 2.0.0.3 --------------- [+] [STD] Updated license recovery tool to use new installer engine. [-] [STD] Fixed printing problem with the report results after using the "Select All" context menu. [-] [STD] Fixed customize report context menu - "Select None" which would deselect the component name. [+] [STD] Updated installer engine and made minor cosmetic modifications to UI. Version 2.0.0.2 --------------- [+] [STD] Updated reference manual and help file. [-] [NGA] The standard T and P are now stored with the physical property data data source rather than the calculation type. [+] [NGA] Added validation checking to prevent standard physical property data for a different base temperature from being transferred to the configuration. [-] [NGA] Fixed problem where the relative gas density was not being calculated for saturated and wet samples when using the ISO 6976 configuration. [+] [NGA] Added a new default configuration, "ISO 6976 (25/20 Deg C).cfg", which has physical properties from the ISO 6976 Standard at a combustion temp of 25 Deg C and a Metering temp of 20 Deg C. [-] [NGA] Fixed problem when transferring NGA calcualtion factors from a standard data source to the current configuration. [+] [NGA] Added ISO 6976 25/20 physical property data source. Version 2.0.0.1 --------------- [-] [RDB] Fixed error that would occur when trying to use sample history alarms with the TotalRawAmount and TotalNormAmount paramaters. [+] [NGA] Added a new default configuration file for refinery gas applications, "Refinery Gas.cfg". [-] [NGA] The NGL/Extended Analysis Quick Start Guide is now integrated into the reference manual, and the separate quick start guide removed from the distribution. [-] [STD] Fixed a problem with the ChemStation Connector application that would result in the Injection Date month and day being swapped in certain circumstances. [+] [STD] The EZChrom/EZIQ Connector can now automatically determine the delimiter character used in the EZChrom ESD export files. Select this new option from the Connector's "Options" menu. You can still force the Connector to use tab or comma delimiters by selecting those options from the "Options" menu. [-] [STD] Fixed problem with component amounts in EZChrom/EZIQ tab-delimited ESD files not being parsed correctly. Version 2.0.0.0 --------------- [+] [STD] Updated the help file, reference manuals, and quick start guides. The instructions for configuring the chromatography data system for use with EZReporter has been moved from the main reference manual to a the quick start guide for the specific operating system. [+] [RDB] Added new NGL results to Results Database. [-] [STD] Fixed problem with the EZChrom Connector not properly parsing the sample information from ESD files when the channel name contains a comma. IMPORTANT: to enable this fix, you must configure EZChrom to export the Sample Information Report in the Method > Advanced dialog. [-] [STD] Fixed multiple errors that would potentially occur when "Clearing" the component list. [-] [STD] Fixed problem with validation of custom numeric sample information fields. [-] [RDB] when null numeric import values are encountered they are converted to "0" to prevent an error that would occur when adding the null result to the database. [+] [STD] Added "registration.dat" to the configuration backup. [+] [STD] The License Status window now includes a "Registration Information" button that allows the current serial number and registration information to be entered or reviewed. [+] [STD] License activation dialog now prompts for serial number and registration contact information and includes this information in the activation request forms. In addition, this information is saved in "registration.dat" and the serial number and registered company are displayed in the "About" window if they have been entered. [-] [STD] Fixed an error in the ChemStation Connector "EZRPT.MAC" that would occur if the first character of the comment field in the run/sequence was an "invalid" character (CR, LF, etc.) Now, those characters are properly replaced by spaces. [-] [STD] Fixed problem with validation of custom numeric sample information fields. [-] [RDB] when null numeric import values are encountered they are converted to "0" to prevent an error that would occur when adding the null result to the database [+] [STD] A window is now displayed upon startup allowing the user to choose a default configuration file the first time the software is started on a new computer, or if the last configuration file that was loaded is missing. [+] [STD] Added a "Splash" screen on startup to display status during initialization to let the user know that the software is "alive" when loading the software. [+] [NGA] Added ISO 6976 Physical Properties, Calculations, and Results [+] [NGA] The base physical property data source is now saved as part of the configuration file. You can edit/assign the data source in the NGA configuration tab and copy the associated calculation factors to the configuration. [-] [NGA] The NGA calculation factors have been moved to a table instead of individual text boxes to accomodate new ISO and NGL factors. [+] [STD] Added a new default configuration, "STD Default.cfg" file for Standard, non-natural gas installations. [+] [NGA] Added ISO 6976 default configuration (ISO Default.cfg) and Calculation check configuration (ISO 6976 Calculation Check.cfg) and data file. [-] [NGA] Renamed the Default configuration files: "hexanes plus.cfg" is now "C6+ Default.cfg", "default.cfg" is "NGA Default.cfg". Version 1.0.9.2 --------------- [+] [NGA] Added Natural Gas Liquids (NGL) Quick Start Guide to the distribution. [-] [STD] Fixed error when the "Delete" button on the parameter configuration tab was clicked with no parameters defined in the table. [+] [NGA] Added GPA 2186 "template" configuration files for "separate", "combined", and "combined and corrected" formats. These configurations include all of the extended components from the GPA TP-17 standard, and can be edited to match a specific application. [+] [NGA] Added extensive support for GPA 2186 type natural gas liquids extended (C6+) fraction support including separate/combined reporting of the extended fraction and correction of extended fraction raw amounts using a "bridge" correction factor. Also, several new extended fraction results can be included in the printed report and in export text files. Version 1.0.9.1 --------------- [+] [NGA] Added an option to the unknown components dialog (from the standard components transfer feature) that allows the "append as new component" option to be be applied to all unknown components. This makes it easier to create configurations containing a large number of standard components. [-] [STD] Adjusted refresh of various component tables to improve performance when loading or updating the tables with large numbers of components. [+] [NGA] Added GPA TP-17 (1998 Revision) standard physical property data source. [+] [NGA] Added support for accepting component raw amounts in Weight%. Mole% amounts are then calculated from Weight%. This option is only intended for use in Natural Gas Liquids applications. Water content is ignored and only the "Dry" Mole% and other results are calculated. Version 1.0.8.2 --------------- [-] [NGA] Added SUMGPM as an alias for the export variable TOTALGPM, COMPRAWMOLEPCT as an alias for COMPRAWAMOUNT, and SOURCEDATAFILEPATH as an alias for SOURCEDATAFILE to provide backward compatibility with older BTU Calculator export templates. [-] [STD] Fixed problem where exported injection or report dates were being truncated with certain custom format strings. [-] [NGA] Added CompNormMolePct and CompNormMolePctDry as aliases for the export variable CompNormAmount to provide backward compatibility with older BTU Calculator export templates. Version 1.0.8.1 --------------- [+] [STD] Updated the help file and reference manuals. [-] [RDB] Fixed a problem where the original configuration file was not being loaded when that option was checked while reprocessing database results. [-] [STD] Reduced the margins on the configuration settings report to prevent the report results table from wrapping in portrait orientation. Also added the configuration file name (without path) to the footer. [-] [NGA] Updated the default configuration files to include the newly-added physical properties where they are available. [+] [NGA] Added the following new default configuration files and correspopnding example data files that can be used to check/validate the EZReporter NGA Calculations. GPA 2172-09 Calculation Check at 14.696 psia.cfg GPA 2172-09 Calculation Check at 14.65 psia.cfg GPA 2172-09 Example Data at 14.696 psia.btu GPA 2172-09 Example Data at 14.65 psia.btu [-] [NGA] Eliminated the "wet" versions of the default configuation files and added water as the last component to the following default files: GPA 2145-09.cfg, GPA 2145-03.cfg, default.cfg, hexanes plus.cfg, ASTM D3588-98 (2003).cfg [+] [RDB] Custom numeric formats are now applied to both summary and detailed numeric results displayed in the Results Database tables. [+] [NGA] Added Cu. Ft. / lb-mol as an editable configurtion setting in the "Other NGA/NGL Calculation Factors" section of the "Natrual Gas Analysis" tab. This setting is used in the calculation of absolute liquid density. [-] [STD] The option to apply the number of decimal places specified for component amounts to all numeric results has been removed. Customizing the numeric format of other results is now handled through the report/result customization table. [+] [STD] The formatting of individual numeric results can now be customized in the Report | Customize table of the configuration editor. Note that the formatting of component and related total amounts is determined by the number of decimal places set in the "Calculations" tab of the configuration editor. [-] [STD] Duplicate component names are not allowed in the configuration component table. An alert is now displayed if any duplicate names are found when saving the configuration. [+] [STD] Added context menu options to the component configuration table to add, clone, or delete a component. [+] [RDB] Updated the results database schema to 1.0.8. Older versions will be upgraded automatically when EZReporter is started. [+] [RDB] Added the new results listed below to the ComponentResults, NGAResults, and SampleResults tables of the Results Database. [+] [NGA] Added the following new results to the NGA report: -Component Normalized Liquid Volume% -Component Gross Heating Value (BTU / gal.) -Component Relative Liquid Density -Component Vapor Pressure (psia) -Component Absolute Liquid Density (lbm / gal.) -Total Normalized Liquid Volume% -Total Gross Heating Value (BTU / gal.) -Total Relative Liquid Density -Total Vapor Pressure (psia) -Total Absolute Liquid Density (lbm / gal.) -Total Absolute Liquid Density (lbm / bbl) -Total Volume (cu. ft. / gal.) -API Gravity [+] [NGA] Added the following physical properties to the standard components and component configuration tables. The standard component database was updated to include the corresponding values from GPA2145-09, GPA2145-03, ASTM D3588-98, and the GPSA Eng. Databook (12th Ed.) where avaialble. -Gross Heating Value (BTU / gal.) -Relative Liquid Density -Absolute Liquid Density (lbm / gal.) -Vapor Pressure (psia) Version 1.0.7.1 --------------- [+] [STD] Updated the help file and reference manuals. [+] [NGA] Updated the "GPA 2145-09 Migration Guide" to reflect the EZReporter NGA screen shots, and renamed it, "EZReporter NGA Physical Property Update Procedure". [+] [NGA] Definitions of the physical properties in the standard components table are now added automatically to the end of a standard physical property printed report. [+] [STD] Added a context menu to the report/result configuration table that allows you to select all results, no results, or the factory default results. In addition, you can reset the report labels to the factory default values. [+] [NGA] Added a context menu to the standard components physical property table that allows you to select all components, no components, or select those components whose name matches a component in the current configuration. [+] [NGA] Added a dialog to select which properties to copy from the standard components physical property to the configuration. This allows configurations to be assembled more easily from multiple physical property data sources. [-] [NGA] Updated the default configuration files to include the newly-added physical properties where they are available. [-] [NGA] Fixed minor problem with transfer of standard component properties to the configuration component table. [-] [STD] Fixed problem where the custom report settings were not always being set correctly when a new configuration file was loaded. [-] [STD] Fixed problem where multiple EZReporter Data File entries would be included in the report header. [-] [STD] Only the report settings (Include in Report, Report Title) that have been changed from their default settings are written to the configuration file. This allows changes to the default settings to be propagated to existing configuration files. [+] [STD] Added an option to the export configuration that allows you to set the file extension of the export file. However, if you have selected a Fixed Export File that already includes a file extension, it will take precidence. [-] [STD] Fixed problem with the export file being truncated after the last line in a component loop. [+] [RDB] Updated the results database schema to 1.0.7. Older versions will be upgraded automatically when EZReporter is started. [+] [RDB] Added the new results listed below to the NGAResults and ComponentResults tables of the results database. [+] [NGA] Added the following new results to the NGA report: -Component Gross Heating Value (BTU / lbm): Dry, Sat., Wet -Component Net Heating Value (BTU / cu.ft.): Dry, Sat, Wet -Component Net Heating Value (BTU / lbm): Dry, Sat, Wet -Component Ideal Gas Density (lbm / cu.ft.): Dry, Sat., Wet -Total Gross Heating Value (BTU / lbm): Dry, Sat., Wet. -Total Net Heating Value (BTU / cu.ft.): Dry, Sat., Wet. -Total Net Heating Value (BTU / lbm): Dry, Sat., Wet. -Total Ideal Gas Density (lbm / cu.ft.): Dry, Sat., Wet -Total Real Gas Density (lbm / cu.ft.): Dry, Sat., Wet [+] [NGA] Added the following physical properties to the standard components and component configuration tables. The standard component database was updated to include the corresponding values from GPA2145-09, GPA2145-03, ASTM D3588-98, and the GPSA Eng. Databook (12th Ed.) where avaialble. -Net Heating Value (BTU / cu.ft.) -Net Heating Value (BTU / lbm) -Gross Heating Value (BTU / lbm) -Ideal Gas Density (lbm / cu.ft.) Version 1.0.6.5 --------------- [-] Addressed a potential problem where an invalid configuration file name in ezreporter.ini would prevent a valid configuration file from being loaded. The default configuration file is now loaded in this situation. [-] Fixed help button on the parameter configuration dialog not mapped to the correct help context ID. [-] Fixed a defect where the parameter format string was not being initialized and displayed in the configuration dialog. Version 1.0.6.4 --------------- [+] A "Standard Edition" manual is now included in the distribution. NGA and Results Database topics are excluded from this version of the manual. [-] Results Database: Fixed minor problem with date select dialog. [-] Results Database: Updated the database schema version to 1.0.6. Older versions will be upgraded automatically when EZReporter is started. [-] Results Database: Made modification to the results database schema so that injection and report date searches work correctly. [-] Minor fix to prevent water content calculation from being performed when NGA calculations are disabled or inactive. Version 1.0.6.3 --------------- [+] Updated the reference manual and help file. [-] A few minor fixes to the configuration editor and configuration report. Version 1.0.6.2 --------------- [+] There are now default numeric formats for each numeric result displayed in the report. If you uncheck the "Apply to report" checkbox in the calculations tab of the configuration editor, the default formats will be used instead of a format based on the number of decimal places specified for component amounts. Note 1: All component amount (Mole%, Weight%, etc.) and related total amounts will still use formatting based on the number of decimal places specified in the calculations tab. Note 2: The default numeric fomats as displayed in the report can not be changed at this time. However, it is still possible to enter custom formats for monitored parameters and exported results. [-] Fixed logic of disabing/enabling of NGA settings when the NGA module is not activated or NGA calculations are disabled/enabled. [+] The configuration backup utility now prompts whether you want to include the results database in the backup. [+] Added a "Print Configuration" dialog that allows you to select which settings you want to print. [+] Updated the configuration printing function to include new settings. [-] Fixed wrapping of component parameters table when printing the configuration. [-] Fixed incorrect report label for Flowing Pressure. Version 1.0.6.1 --------------- [+] NGA: Added option to prompt for Flowing Temperature and Pressure and to calculate the water content correlation based on the GPA 2145-09 & IGT RB8 standard. The calculated "as delivered" water mole fraction is reported as the "Wet" results. [-] Results Database: Updated the database schema version to 1.0.5. Older versions will be upgraded automatically when EZReporter is started. [+] Results Database: When new results are saved to the database, the new result is now automatically selected and displayed in the sample results summary table. [+] The new sample information result "ResultComment" was added to the report and results database. [+] Added a Result Confirmation screen that can be displayed before a result is added to the database. It displays the current parameters and alarms and gives the option to Accept, Reject, or cancel adding the result to the database. In addition a Result Comment can also be entered and save in the results database. If the text file "resultcomments.dat" is present in the EZReporter program folder, then each line present in that text file will be added to the Result Comment list box to provide a structured set of comment strings. [-] The sample results summary and detail tables are now cleared after deleting all results and when queries return no results. [-] Disabled editing of parameters directly from the main parameter table. Parameters should be edited from the configuration window. [+] Right clicking on a component parameter in the parameter configuration table displays a context menu that allows you to add the remaining components in the configuration to the parameter table using the selected parameter as the template. [+] Right clicking on a parameter in the parameter configuration table displays a context menu that allows you to clone the properties of the selected parameter to a new parameter. [+] The order of parameters displayed in the parameter monitoring table can now be changed by dragging a row in the parameter configuration table to a new location. This is done by 1) selecting the row you want to move by clicking it with the left mouse button, and 2) click and hold the right mouse button and drag the row to the new postion. [+] Implemented sample history alarm limits for the parameter alarms. This option is available if the results database is activated or in trial mode. [-] Results Database: Fixed a defect where the NGA statistics were not being calculated correctly when the limit parameter was set. Version 1.0.5.8 --------------- [+] Report printing algorithm enhanced so that a long value in the Sample information table that exceeds the page width is truncated with ending ellipses (...) to prevent the table from breaking onto a new page. [+] Report printing algorithm enhanced so that when the component results table exceeds the page width, the extra results are printed in a new table below rather than causing an immediate page break. Version 1.0.5.7 --------------- [-] Results Database: Fixed the result comparison dialog not getting the norm mole% values from the correct database field and returning "0". [-] Report header results that are file names (configuration file, source data file, etc.) now are displayed as only the file name with the full path removed. This is to prevent long paths from causing the report to break onto a new page. [-] The Batch Process dialog no longer disables the "Export" option if the Automatic export option is disabled in the configuration. This allows the user to batch export results that were collected offline once they are hooked up to the network. Version 1.0.5.6 --------------- [-] If the water amount is added manually for a "Wet" calculation, it is included in the Raw component amounts. The TotalRawAmount includes the raw water amount, while the TotalRawMolePct excludes the raw water amount. [-] Fixed handling of water content in "NGA" vs "Standard" edition. Water is included in NormAmount/normalization in the Standard Edition. Water is excluded from NormAmount/Normalization in the NGA Edition: In the NGA edition NormAmount is the Normalized Mole% (Dry). [-] Results Database: The Import dialog now properly displays a warning if either the import template or import file have not been set to a valid file. [-] Results Database: Fixed defect that caused the Sample Information (SampleName, InjectionDate, etc.) to not be saved to the database during Import. [+] Results Database: Display of import template and import file in Import Results dialog box now uses a "Compacted Path" if the path is too wide to display in the given label area. Version 1.0.5.5 --------------- [+] The document name used for the printed report is now set to the sample name. If the sample name is blank the document name is set to "EZReporter Report" rather than "Document". [-] Results Database: The Batch Process dialog has been modified so that the Batch Plot and Batch Export options will be disabled if the current configuration has not been set up to use those features. [-] Results Database: The Batch Process dialog "Abort" button will now close the dialog if an error occurs during processing. Version 1.0.5.4 --------------- [+] Updated help file and reference manual. [-] Fixed defect where normalized weight% was not being corrected properly for rounding error for negative differences. [+] Results Database: Added a "Cancel" option to the database upgrade dialog. If the user cancels the upgrade, the results database will be disabled. [-] Results Database: Updated the database schema version to 1.0.4. Older versions will be upgraded automatically when EZReporter is started. [+] NGA: Added internal support to implement the GPA 2145-09/IGT RB 8 Water Content Calculation in a future version. [+] NGA: Added "Sat" and "Wet" component results for Gross Heating Value, Relative Density, GPM, and Compressibility/Z. [+] Results Database: Added an option to the database import dialog to set the ExportStatus field so that imported results are not re-exported. [+] NGA: Added ASTM D3588-98 (2003) physical properties to the Standard Components table. [-] NGA: Printing the Standard Components table now includes all properties present in the table. [-] If no raw component amounts are present, but Norm Amounts or Norm Mole% are, the normalized values will be used when processing/calculating results. this situation occurs when results are imported into the results database without the raw amounts. [-] If values already exist for custom sample information fields, they will be displayed in the "Edit Current Data Set" dialog instead of the default or recalled values. [-] Results Database: Changed the order of the buttons so they conform better to workflow (left to right). [+] Results Database: Import Results now has an option to append to or replace the current results with the imported results. [-] Results Database: The Import Results button has been moved from the configuration screen to the main Results Database screen. [-] Results Database: Moved TotalNormAmount from the NGAResults table to the SampleResults table. Existing results database files will be upgraded on startup. [+] Made significant enhancements to the internal reporting and processing architecture to allow new results to be calculated and displayed in the report more easily. [+] NGA: Added the following new physical properties and calculations to the NGA module: Physical Properties: -MolarMass (GPA 2145-09, GPA 2145-03, and GPSA Eng. Data Book) Calcualtions/Results: -Component Molecular Weight (Dry, Sat., Wet) -Total Molecular Weight (Dry, Sat., Wet) -Component Normalized Weight% (Dry, Sat., Wet) [+] ChemStation Connector: Modified the "ezrpt.mac" macro so it Adds an option to the ChemStation "Report" menu to generate an EZReport. [+] GPA 2261 repeatability or reproducibility limits are now included in the standard component tables for all data sources. [-] NGA: Standard component physical properties are now stored in an SQLite database to facilitate addition of new properties and data sources. Both the component configuration table and the standard component table were modified to support this change. Version 1.0.4 ------------------ [-] Fixed a problem with internal object references that could cause customized report options to be ignored when processing results automatically from a chromatography data system. [+] Updated the help file and reference manual [-] The component report table's behavior has been changed so that it now displays water as a component if present in the component list. This was done so that the Component Sat/Wet mole% results also include the water result. [-] The "Component Name" column of the component results table is now frozen so that the component name is always visible when scrolling horizontally, or when the table is split between multiple pages. [+] Added calculation of the following new results: -Component Norm% (Water Saturated) -Component Norm% (Wet) -Total GPM (Water Saturated) -Total GPM (Wet) These results are available for display in the report, parameter window, and for export. They have not yet been added to the Results Database. [+] The Report configuration now includes a "Customize" tab that displays a table of the results that are availble to include in the displayed/ printed report tables. You can now customize the results labels, as well as set whether or not a result is included in the report. [+] Enhanced the custom sample information fields to allow an unlimited number of fields and improve adding, deleting, and rearranging the order of fields. In addtion, you can now set whether or not a field is included in the printed/displayed report. [+] Added a menu option under "Tools" to backup the current configuration and log files to a zip file and optionally copy it to a folder on a flash drive or other location. Version 1.0.3 ------------------ [-] Modified the software version resource to include an explicit build version. [-] Modified the results database import function to handle import files containing blank lines without generating an error. [-] Changed the way that import/export/data files are opened and initialized. This addresses a intermittent problem with the files not being opened correctly prior to reading/scanning them. Version 1.0.2 ------------------ [+] Updated the help file and reference manual. [-] Updated the EZChrom and ChemStation connector programs so that they display an error in their log windows if EZReporter is not running when they are called. Having the connector start EZReporter and then process results has never been reliable. [-] Updated the EZChrom Connector (ProcessEZChromData.EXE) so that it can read tab-delimited files from EZChrom. You must configure EZChrom and the EZChrom Connector software to use tab delimiters if you want to use commas in component names (1,3-Butadiene for example). [-] Updated the EZReporter ChemStation macro (ezrpt.mac) so that component names in the "ezrpt.txt" file are contained within quotations. This allows component names with commas to be processed correctly by the ChemStation Connector software. [+] Added shortcuts to the EZChrom Connector and ChemStation Connector software to the EZReporter start menu program group. Version 1.0.1 ------------------ [+] Enhanced the EZChrom connector program (ProcessEZChromData) so that it recognizes and processes external standard report files (*.ESD) from non Micro GC instruments that use different signal/trace labels. [+] Updated reference manual and help file. [+] Enhanced the Results Database processing configuration to enable/disable display of sample history, to limit the number of results displayed, and to filter the results based on result status. [+] Enhanced the Results Database find record dialog to limit the number of results returned when searching by sample name. [-] Reworked display of the sample history to deal with results with the same sample name but different numbers and names of components. This also has improved the speed of generating the history table. [-] Fixed problem where the sample history display was being updated twice when a new result was added to the Results DB during auto processing. [+] Added a sample-specific configurations processing capability. Updated the EZChrom, Cerity, and ChemStation "connectors" to support this feature. Version 1.0.0 ------------------ [-] RC3: Enhancements to the ChemStation Connector program and macro to support the "B" rev ChemSTations with Unique Folder Creation on. [-] RC3: Fixed a problem with the results database import function using the wrong default folder and import template file. [-] RC3: Component GPM values are now corrected for gas compressibility as specified in GPA2172-09. [+] RC2: Added a refinery gas analysis configuration (refinerygas.cfg) file that can be used as a starting point for setting up a refinery gas analyzer. [-] RC2: Added ChemStation data processing via the ezrpt.mac macro and ChemStation "Connector" program, ProcessChemStationData.exe. The macro file is copied to the ChemStation "Core" folder automatically during installation if a ChemStaton is detected on the computer. [-] RC2: Fixed problem with labeling the x-axis of history plots when switching between injection date/time and data points. [+] RC2: Added Wobbe Index (Dry, Sat, and Wet) to report, import/export variables, and Results DB. [+] RC2: Updated manual and help file. [+] RC1: Initial release. >>End of Readme<<